Click Here!

 

 

How do you actually feel in regards to No Hot Water — Water Heater Repair?

Numerous modern-day houses make use of an electric hot water heater for their heating unit, as a result of its benefit and also simplicity of use. Nevertheless, just like any other electric appliances, issues might occur with its use, suddenly. It can be actually aggravating to awaken to a cool shower instead of a warm one or having your bath with water that isn't hot adequate or even also hot. Whatever the situation might be, water heater issues can be fairly nerve-racking. The good news is, we have actually made a list of feasible remedies to your water heater problems. There are a variety of elements that might create a lot of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it dealt with must not posture excessive of a concern if you follow these actions:

 

Call A Specialist:

If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't working, you might need to get in touch with a specialist plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold taps have actually been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the situation may be, an expert plumber would assist resolve the problem.

 

Inspect Your Power Supply:

As standard as this may seem, it is extremely essential. Without adequate power, your water heater will not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, merely transform it off and on again. Replace any type of damaged or worn-out fuse. Check the device with power after these adjustments to see if it's currently functioning.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to inspect the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open up the access panel and also press the red switch for temperature reset above the thermostat. This should aid heat up the water. Turn the circuit breaker back on and also examine if the issue has been dealt with.

 

Examine the Burner in the Water Heater:

If it's not a power issue, then attempt looking into your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is defective, replace that component and after that check whether the warm water is back on.

 

Verdict

Hot water heater issues are not always significant. Most of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the faulty components must do the trick. However, if you are still incapable to fix the problem, give a call to your nearest plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you enjoy reading about How to Troubleshoot and Repair an Electric Water Heater? Create a review directly below. We'd be glad to hear your responses about this write-up. We are looking forward that you visit us again in the future. Enjoyed reading our article? Please share it. Help another person find it. Many thanks for your time spent reading it.

Book Your Appointment